Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (53 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (361 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (324 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (245 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (665 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (49 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(17)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (15 pcs.)
All best sellers

There are 27 products.

Showing 1-27 of 27 item(s)
Active filters
  • Categories: BURGLAR ALARMS
  • Categories: POOL & SPA ACCESSORIES
  • Categories: TEMP/HUMIDITY/CO2 SENSORS
  • Categories: VIBRATION DAMPERS

Reference: 15-015

Vibration damper Premium

(0)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 499.00
More
In Stock (208 pcs.)

Reference: 15-016

Vibration damper Premium

(1)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 499.00
More
In Stock (103 pcs.)

Reference: 17-003

Pool Spounge 18 pcs

(0)

Pool sponge 18 pcs 18-pack Melamine cleaning sponge, fantastically effective for cleaning the waterline in your pool, but also incredibly effective for cleaning plastic and / or and chrome pool details. Highly recommended by us, we use it ourselves both for the pool and in the kitchen / toilet - a must if you have not already tried!

Price SEK 179.00
More
In Stock (26 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(17)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (15 pcs.)

Reference: 15-005

Vibration damper Premium Plus

(0)

Vibration Damper Premium + "Stiff" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This + kit has a bit stiffer springs than our "soft" package, especially designed for those who mount in wind exposed areas, eg. in the mountains or by the sea where there are often harsh winds.

Price SEK 869.00
More
In Stock (56 pcs.)

Reference: 15-006

Vibration damper Air to Water

(2)

Steel Spring Isolators. High-quality galvanized steel spring isolators that beats most when it comes to anti-vibration of Air to Water heat pumps, weight of the heat pump can be 100 - 200 kg. Be aware that these dampers are higher than most rubber dampers if you are to replace already fitted rubber dampers.

Price SEK 869.00
More
In Stock (45 pcs.)

Reference: 15-002

Brand: Energibutiken, WebIQ AB

Vibration dampers with washers and nuts

(0)

Vibration dampers with washers and nuts Extra soft vibration dampers, complet kit of 4 pcs including washers and nuts, for those who already have a heat pump mounted on wall brackets and are disturbed by the vibrations from/of the wall. The kit includes 4 vibration dampers.

Price SEK 199.00
More
In Stock (9 pcs.)

Reference: 15-004

Brand: Energibutiken, WebIQ AB

Sylodyn vibration dampers for heat pumps

(2)

Sylodyn vibration dampers for heat pumps Sylodyn are used with good results as vibration absorbers to heat pumps to reduce structure-borne sound in the house's design due to the vibrations of the compressor and circulating pumps can cause. (Refers to exhaust air, geotermal and ground source heat pumps - not air/air heat pumps)

Price SEK 799.00
More
In Stock (18 pcs.)

Reference: 22-001

250 OHM Resistor

(0)

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...

Price SEK 69.00
More
In Stock (39 pcs.)

Reference: 03-011

Power supply 24 VDC / 0.5 A

(0)

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Price SEK 199.00
More
In Stock (15 pcs.)

Reference: 20-002

Brand: Energibutiken, WebIQ AB

Name: Wired Flashing & Sound Siren

(0)

Name: Wired Flashing & Sound Siren ◆Wired Flashing & Sound Siren;◆Installation: wall-mounted;◆Power: DC9-12V;◆Sound level:100-110dB;◆Color: Red;◆Rated current: 250mA;◆Material: ABS;◆Operation Temp: –10°C to +50°C;◆Humidity: 5%--95% non-condensing;◆Unit Weight: 120g;

Price SEK 399.00
More
In Stock (4 pcs.)

Reference: 03-039

Brand: ONTECH

ONTECH IR 9016 air-source heat pump remote control

(0)

Ontech IR 9016 The Ontech IR 9016 is an accessory that needs to be connected to the Ontech GSM 9060 and makes it possible to control your air source heat pump from a distance. You simply move the air source heat pump remote control to your phone, tablet or computer. The heat pumps are controlled via Ontech Control or SMS or apps for Android wherever you...

Price SEK 365.00
More
In Stock (7 pcs.)

Reference: 07-002

Brand: Energibutiken, WebIQ AB

Humidity and temperature transmitter with display

(0)

Humidity and temperature transmitter with display Wall mount combined humidity and temperature transmitter with LCD display suitable for advanced applikations such as clean rooms, greenhouses, warehouses, shops, commercial buildings, etc. The sensor has 2 outputs with 0-10V or 4-20mA (selectable by jumpers) and RS485 Modbus.

Price SEK 1,295.00
More
Out-of-Stock

Reference: 07-006

Brand: Energibutiken, WebIQ AB

Temp/Fukt/CO2-givare modbus

(0)

Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for duct installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor. With LCD-display

Price SEK 3,309.00
More
Out-of-Stock