Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (53 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (361 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (324 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (245 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (685 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (49 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(17)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (17 pcs.)
All best sellers

There are 108 products.

Showing 1-28 of 108 item(s)
Active filters
  • Categories: HEAT METERS
  • Categories: LOGGER ACCESSORIES
  • Categories: LoRa WAN

Reference: 12-015

Itron CF ECHO II Qp 0.6 heat meter

(0)

Itron CF ECHO II Qp 1.5 heat meter Itron heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels. Pulse/M-bus card as accessorie.

Price SEK 2,595.00
More
In Stock (1 pcs.)

Reference: 12-001

Itron CF ECHO II Qp 1.5 heat meter

(0)

Itron CF ECHO II Qp 1.5 heat meter Itron heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels. Pulse/M-bus card as accessorie.

Price SEK 2,651.00
More
In Stock (6 pcs.)

Reference: 02-002

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO outdoor sensor

(1)

1-wire PRO Outdoor sensor Three-wire Dallas DS18B20 outdoor sensor suitable for Logger 3030 and Logger 2020's 1-wire inputs. (Can be used on both the parasite power and 3-wire terminals depending on how you connect it.)Solid enclosed outdoor sensor from which to measure the temperature outdoors, range -55 to +125 ° C.

Price SEK 249.00
More
In Stock (40 pcs.)

Reference: 01-061

SDM630MCT-Lora MID

(0)

The SDM630MCT-Lora is a new generation three phase multi function energy meter with wireless communication Lora module built inside. with public Lora protocol, the user can easily build a wireless meter reading system.

Price SEK 1,857.00
More
In Stock (177 pcs.)

Reference: 12-002

Itron CF ECHO II Qp 2.5 heat meter

(0)

Itron CF ECHO II Qp 2.5 heat meter Actaris heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.

Price SEK 2,599.00
More
In Stock (3 pcs.)

Reference: 02-001

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO indoor sensor

(0)

Indoor Sensor 3-wire Dallas DS18B20 temperature sensor suitable for a Logger 2020's 1-wire input (Terminals 1,2,3).Nice nested inside sensor/room sensor from which to measure the temperature in your house, garage or similar place, measuring range -35 to +85°C.

Price SEK 249.00
More
In Stock (97 pcs.)

Reference: 01-076

Brand: Eastron

Single Phase SDM230-LoRa WAN MID

(0)

Eastron SDM230 LoRa WAN MID is a new generation single-phase multi-function electricity meter with wireless communication, the meter has been built Lora WAN module. Range up to 3 km. The electricity meter can wirelessly send data to the nearest LoRa WAN gateway, or to an existing local LoRa WAN network. The device measures and displays properties of...

Price SEK 1,113.00
More
In Stock (100 pcs.)

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

(0)

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Price SEK 119.00
More
In Stock (3 pcs.)

Reference: 01-082

Brand: RAK

LoRaWAN Gateway 8 channels

(0)

Product description WisGate Edge Lite 2 version 2 (RAK7268V2) is the latest RAK indoor gateway for LoRaWAN. Can be used in combination with e.g. www.energibutiken.se SDM530 LoRa WAN electricity meter for remote reading of electricity meters with a range of up to 1.5 km. In our web service e-logger.se you can see the consumption of each individual...

Price SEK 2,400.00
More
In Stock (5 pcs.)

Reference: 02-003

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 5 meter

(0)

Sensor 5 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 5 meter cable Chip: Dallas DS18B20

Price SEK 219.00
More
In stock (75 pcs.)

Reference: 01-085

Brand: RAK

LoRa WAN Gateway with (4G) LTE, RAK7268CV2

(0)

Product description The software may need to be updated for the gateway to work as intended for E-logger, we offer the service, contact us at info@webiq.se or call us at 070-6798263 for a quote. WisGate Edge Lite 2 version 2 (RAK7268CV2) is the latest RAK indoor gateway for LoRaWAN with built in Mobile modem for transferring data to your server without...

Price SEK 4,175.00
More
In Stock (1 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 01-086

Brand: RAK

RAK7431 RS485 / Modbus to LoRa WAN Bridge

(0)

RAK7431 WisNode Bridge Serial is an RS485 to LoRaWAN converter designed for industrial applications. The device relays ModBUS data using the LoRaWAN network as means of wirelessly transmitting to and from the end-devices. RAK7431 can operate in all of the LoRaWAN bands within the standard parameters defined by the LoRa Alliance.

Price SEK 1,299.00
More
In Stock (7 pcs.)

Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (53 pcs.)

Reference: 12-008

M-bus + Pulse Output board for Actaris CF ECHO II heat meter

(2)

Pulse Output board for Actaris CF ECHO II heat meter M-bus + Pulse Output option board for Actaris CF ECHO II Heat meters, if you want to monitor your Heat Meter to for example Logger 2020, you'll need this accessory. Loggning heat meters to Logger 3030 PRO demands our modbus to M-bus converter. 1 pulse / kWh

Price SEK 375.00
More
in stock (10 pcs.)

Reference: 04-005

Brand: Energibutiken, WebIQ AB

Electricity meter sensor

(0)

Electricity meter sensor Sensor reads flashing from IR or UV diodes, particularly for use with the Logger 2020. Simply attach these sensor via 2-lead wire to Logger 2020:s E1 or E2 terminals in order to monitor energy and power consumtion.

Price SEK 49.00
More
In Stock (13 pcs.)

Reference: 12-011

Brand: Itron

230 V power supply for heat meter CF-Echo II

(0)

230 V power supply for CF-Echo II When logging energy, power, flow, temperature and volume using Logger 3030 PRO and Itron CF-Echo II, you might need to replace the battery module that CF-Echo II is equipped with as standard.

Price SEK 445.00
More
In Stock (10 pcs.)

Reference: 12-010

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 219.00
More
In Stock (1 pcs.)

Reference: 04-024

Brand: Finder

Relay module 12/230 V

(0)

12 Volt relay module for Logger 1010 & Logger 3030. Relay module: For connection to the digital outputs of Logger 1010 or Logger 3030. Can also be used in combination with one of our contactors for three-phase loads and/or for single-phase currents above 8A. Primary: 12 V dc, 0.5 W Secondary: 230 V ac, max 8 A.

Price SEK 229.00
In stock (16 pcs.)

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

(0)

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Price SEK 139.00
More
In Stock (24 pcs.)

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

(0)

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Price SEK 185.00
More
In Stock (52 pcs.)

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

(0)

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Price SEK 159.00
More
In Stock (32 pcs.)

Reference: 02-036

Brand: Energibutiken, WebIQ AB

Compression fitting for temp sensors

(0)

Compression fitting for temp sensors Smooth compression fittings for mounting temperature probes with 6 mm sleeve (see picture). This compression fitting allows you, via a T-pipe coupling, to plug in your temp sensor directly in the flow of the liquid you are measuring the temperature of.

Price SEK 159.00
More
In Stock (6 pcs.)