Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (57 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (361 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (333 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (247 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (695 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (49 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(16)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (21 pcs.)
All best sellers

There are 17 products.

Showing 1-17 of 17 item(s)
Active filters
  • Categories: MEASURING TRANSDUCERS
  • Categories: POWER SUPPLY
  • Categories: WATER METER

Reference: 23-001

Power supply 12 VDC / 2.1 A

(0)

Mean Well S-25-12 power supply 230 VAC to 12 VDC, 2.1 A Switching power supply with 12 V 2.1 A out, adjustable output voltage via potentiometer. Required for those who intend to connect many M-bus meters to our M-Bus Master, but also for those who want to connect sensors that require more power than the Logger 3030 can deliver on their analogue outputs...

Price SEK 295.00
More
In Stock (2 pcs.)

Reference: 06-001

Brand: Energibutiken, WebIQ AB

PT1000 TRANSDUCER to 0-10 volt

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 810.00
More
In Stock (6 pcs.)

Reference: 03-013

Power supply 12V, 1.25A, 15W HDR-15-12

(0)

Power supply 12V, 1.25A, 15W H Switched power supply 12V 1.25A 15W for DIN rail. The unit has adjustable output voltage 11V to 13V and handels voltage 100V to 240V. The unit has a working temperature of -30°C to + 70°C. This type of power supply has a low idle consumption.

Price SEK 199.00
More
In Stock (287 pcs.)

Reference: 06-002

PT1000 TRANSDUCER 4-20 mA

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 810.00
More
In Stock (8 pcs.)

Reference: 03-033

Power Supply for Logger 1010 & 3030

(0)

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Price SEK 99.00
More
In stock (87 pcs.)

Reference: 22-001

250 OHM Resistor

(0)

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...

Price SEK 69.00
More
In Stock (39 pcs.)

Reference: 03-032

Power Supply for Logger 1010 & 3030

(0)

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Price SEK 109.00
More
In stock (85 pcs.)

Reference: 13-006

Brand: Itron

Flow meter Qn 2.5

(0)

Flow meter Qn 2.5. Water meter Qn 2.5 cold water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical mounting.

Price SEK 465.00
More
In Stock (35 pcs.)

Reference: 13-007

Brand: Itron

Flow meter Qn 2.5 hot water

(0)

Flow meter Qn 2.5. Water meter Qn 2.5 hot water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical...

Price SEK 529.00
More
In Stock (38 pcs.)

Reference: 13-009

Brand: Itron

Cyble M-bus module

(1)

Cyble M-bus module for Unimag Cyble water meter An M-bus module for Unimag Cybel water meter for use in remote reading systems (AMR) or in datalogging of flow and / or volume in other contexts, such as In tap water systems or heating systems.

Price SEK 829.00
More
In Stock (22 pcs.)

Reference: 13-008

Brand: Itron

Puls module Cyble sensor 2W

(0)

Cyble Sensor pulse module with 1 pulse / liter Cyble communication modules have been designed to meet the requirements of MID for those who want to read their water meters.With hundreds of thousands of installed cyble sensors, we have proven that this patented technology ensures reliable remote reading of water meters, both when reading conter, but also...

Price SEK 680.00
More
In Stock (7 pcs.)

Reference: 13-005

Connection Kit DN15

(0)

Connection Kit DN15 Used when connecting heat meters and/or water meters. Converts 3/4" straight thread to 1/2" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 109.00
More
In Stock (13 pcs.)

Reference: 12-009

Brand: Itron

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 99.00
More
In Stock (22 pcs.)

Reference: 12-010

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 219.00
More
In Stock (2 pcs.)

Reference: 13-011

Puls module Cyble sensor 2W K10

(0)

Cyble Sensor pulse module with 10 pulse / liter Cyble communication modules have been designed to meet the requirements of MID for those who want to read their water meters.With hundreds of thousands of installed cyble sensors, we have proven that this patented technology ensures reliable remote reading of water meters, both when reading conter, but also...

Price SEK 680.00
More
In Stock (4 pcs.)