LOGGER ACCESSORIES

Reference: 02-052

Brand: Energibutiken, WebIQ AB

Temperature - Humidity - Light-sensor module THLIQ-02

Temp / Humidity / Light Module THLIQ-02 High quality module with built-in temperature, humidity and light sensor, based on temp/humidity sensor Bosch GY-BME280. Fits Logger 3030 and Logger 3030 PRO Modbus

Reference: 02-002

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO outdoor sensor

1-wire PRO Outdoor sensor Three-wire Dallas DS18B20 outdoor sensor suitable for Logger 3030 and Logger 2020's 1-wire inputs. (Can be used on both the parasite power and 3-wire terminals depending on how you connect it.)Solid enclosed outdoor sensor from which to measure the temperature outdoors, range -55 to +125 ° C.

Reference: 02-001

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO indoor sensor

Indoor Sensor 3-wire Dallas DS18B20 temperature sensor suitable for a Logger 2020's 1-wire input (Terminals 1,2,3).Nice nested inside sensor/room sensor from which to measure the temperature in your house, garage or similar place, measuring range -35 to +85°C.

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Reference: 02-003

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 5 meter

Sensor 5 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 5 meter cable Chip: Dallas DS18B20

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 04-005

Brand: Energibutiken, WebIQ AB

Electricity meter sensor

Electricity meter sensor Sensor reads flashing from IR or UV diodes, particularly for use with the Logger 2020. Simply attach these sensor via 2-lead wire to Logger 2020:s E1 or E2 terminals in order to monitor energy and power consumtion.

Reference: 04-002

Brand: Energibutiken, WebIQ AB

HTMIQ High temp module

HTMIQ High temp module for Logger 2020 and SunLogger 2020 With this module, you can measure temparatures in the range above 125°C (up to 400°C)

Reference: 04-024

Brand: Finder

Relay module 12/230 V

12 Volt relay module for Logger 1010 & Logger 3030. Relay module: For connection to the digital outputs of Logger 1010 or Logger 3030. Can also be used in combination with one of our contactors for three-phase loads and/or for single-phase currents above 8A. Primary: 12 V dc, 0.5 W Secondary: 230 V ac, max 8 A.

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Reference: 02-036

Brand: Energibutiken, WebIQ AB

Compression fitting for temp sensors

Compression fitting for temp sensors Smooth compression fittings for mounting temperature probes with 6 mm sleeve (see picture). This compression fitting allows you, via a T-pipe coupling, to plug in your temp sensor directly in the flow of the liquid you are measuring the temperature of.

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Reference: 02-012

Brand: Energibutiken, WebIQ AB

PT1000 outdoor temp sensor

PT1000 Outdoor temp sensor is a 2 (or 3)-wire temperature sensors suitable for a Logger 2020's högtempmodul HTMIQSuitable for outdoor measurements in the temperature range from -50 to +90 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation

Reference: 02-013

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 02-022

Brand: Energibutiken, WebIQ AB

PT100 Room sensor

PT100 Room temp sensor Two-wire temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for indoor measurements in the temperature range -35 to +70 ° C.

Reference: 02-024

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 1 meter

PT100 sensor, max 200°C, 1 meter6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-023

Brand: Energibutiken, WebIQ AB

PT100 outdoor temp sensor

PT100 Outdoor temp sensor Two-wire temperature sensors suitable for a Logger 2020's high temp module HTMIQ Suitable for outdoor measurements in the temperature range -50°C ... +90°C. Can replace sensors used in PT100-based building automation systems

Reference: 04-008

Brand: Energibutiken, WebIQ AB

Junction Box

Junction Box Junction box, with five-pole terminal block. To connect the temperature sensors and electricity sensors cables to Logger 2020.

Reference: 13-001

Brand: Energibutiken, WebIQ AB

Flow Meter Qp 1.5 with Pulse Output

Flow Meter Qp 1.5 Pulse output Flow meter with pulse output for measurment of flow in the range of 30-3000 liters/h with an accuracy better than +-2%.

Reference: 13-002

Brand: Energibutiken, WebIQ AB

Flow meter Qn 2.5, with Pulse Output.

Flow meter Qn 2.5, with Pulse output Flow meter with pulse module for measuring flow in the range 30-5000 l/h with an accuracy better than +-2%

Reference: 12-009

Brand: Itron

Connection Kit DN20

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Reference: 13-005

Connection Kit DN15

Connection Kit DN15 Used when connecting heat meters and/or water meters. Converts 3/4" straight thread to 1/2" tapered thread Kit includes 2 pcs with gaskets.

Reference: 04-009

Brand: Energibutiken, WebIQ AB

Analog Light sensor 0-5 V

Light sensor Three-wire lightning to voltage converter, the sensor are adapted to the Logger 2020's A/DMIQ I/O-module, and can be used both as analog sensor to the analog inputs, and for indicatiing status of measured diods/lamps indication service status  - on the digital inputs of the A/DMIQ -module.

Reference: 04-011

Brand: Energibutiken, WebIQ AB

Ethernet cable

Ethernet cable Unshielded cabling consisting of a 4-pair cable, Category 5e (Cat 5e), and an RJ45 connector on both ends. This cable are needed to connect Logger 2020 to your router if you want to run your Logger 2020 against the web service e-logger.se - or if you need to update the software in your Logger 2020.Select cable length before adding to cart.

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.