Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (53 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (339 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (284 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (229 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (649 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (43 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(17)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (4 pcs.)
All best sellers
SDM230-LoRaWAN-MID
  • SDM230-LoRaWAN-MID

SDM230-LoRa Mesh

01-064

The SDM230 LoRa Mesh is a new generation single phase multi function energy meter with wireless communication Lora module built inside

SEK 699.00
Tax included
Quantity
In Stock (42 in stock)

Description

The SDM230 LoRa Mesh

is a new generation single phase multi function energy meter with wireless communication Lora module built inside. with Eastron lora gateway ESP-6 , the user can easily build a wireless meter reading system.

The Unit measures and displays the characteristics of single phase two wire(1P2W), single phase three wire (1P3W) networks. The measuring parameters include voltage (V), Current (A), Frequency (Hz), Power(kW/kVar/kVA), import/export/total energy(kWh/kVarh). The unit can also measures Max. demand current and power at preset period of up to 60 minutes.

Product Parameters

Specifications:

  • Input Voltage: 230VAC (80%~120%)
  • Input Current: 0.5~10(100)A (Max 100 A)
  • Frequency: 50/60Hz
  • Network: L+N
  • Output: LoRa
  • Communication Speed: 5.17~0.27kbps
  • Spreading Factor: 7~12
  • Measurements: V,A, Hz, PF, kWh, kVarh, dmd, P,Q,S, etc.
  • Electromagnetic Compatibility: IEC61326-1:2013
  • Installation Category: CAT I

Accuracy:

  • Voltage 0.5% of range maximum, Current 0.5% of nominal
  • Frequecy: 0.2% of mid-frequency
  • Power factor: 1% of uity (0.01)
  • Active power( W): ±1% of range maximum
  • Reactive power (VAr):±1% of range maximum
  • Apparent power(VA): ±1% of range maximum
  • Active energy (Wh): Class 1 IEC 62053-21
  • Reactive energy (VARh): ±1% of range maximum
  • Total harmonic distortion: 1% up to 31st harmonic
  • Response time to step input: 1s, typical, to>99% of final reading, at 50Hz

Environmental Characteristics:

  • Operating Temperature: -25°C to 55°C
  • Storage Temperature: -40°C to 70°C
  • Humidity Rating: <95% RH at 50 °C (non-condensing)
  • Pollution Degree: 2
  • Altitude: 2000m
  • Vibration: 10Hz to 50Hz, IEC 60068-2-6

Mechanical Characteristics

  • Weight: 250g
  • IP Degree of Protection (IEC 60529): IP51 front display
  • Dimensions (WxHxD): 99x36x63
  • Mounting Position: Vertical
  • Panel Thickness: 1~5mm
  • Material of meter case: Self-extinguishing UL 94 V-0
  • Mechanical environment: M1

Safety

  • Measurement Category: Per IEC61010-1 CAT III
  • Current Inputs: Require external Current Transformer for Insulation
  • Over voltage Category: CAT III
  • Dielectric Withstand: As per IEC 61010-1 Double Insulated front panel display
  • Protective Class: II

Communications

  • Interface standard and protocol: LoRa Mesh
  • Network: Star/ Cluster
  • Frequency: 868Mhz
  • Communication distance: <3000m
Product Details
01-064
0
42 Items
Accessories
16 other products in the same category:

Reference: 01-031

Distribution box 8 modules premium

(0)

Distribution box 8 modules Premium, white. For safe installation of electricity meters, relays, circuit breakers, earth leakage circuit breaker mm DIN rail.

Price SEK 294.00
More
In Stock (20 pcs.)

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

(2)

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...

Price SEK 1,395.00
More
In stock (245 pcs.)

Reference: 01-037

Split core current transformer ESCT-B88 800A/5A

(0)

Split core current transformer 800A / 5A, Top Quality! Inner diameter of the coil is 80 X 80 mm. Fits our electricity meters SDM630 MCT V2, SDM120CTM, SDM120CTMB External dimensions: 142 X 145 X 49 mm Weight / spool 1.135 kg Includes 1 pcs (Buy 3 pcs to three-phase electricity meters) Accuracy 0.5%

Price SEK 795.00
More
In Stock (15 pcs.)

Reference: 01-080

Current transformers 250 A SCT024TS 250A/5A

(0)

Openable current coils 250A/5A The current coil fits the following electricity meters SDM630 MCT V2 MID, SDM630 MCT V2 non-MID, SDM120D CT-P, SDM120CTM MID, SDM120CTMB M-bus MID, SDM630 MCT M-bus V2 MID. Or Carlo Gavazzi EM330-HM1 Inner diameter of the coil is 23 X 23 mm. External dimensions: Width 52 X Height 76 X Depth 42 mm 1 piece (Buy 3 pieces for...

Price SEK 199.00
More
In Stock (78 pcs.)

Reference: 26-029

Mobil elmätare CEE16 inkl. Adapter

(0)

The PRO-flex is a practical and simple solution that allows you to measure the energy consumption of mobile energyusers / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a completeand costly infrastructure per location.

Price SEK 1,750.00
More
In Stock (14 pcs.)

Reference: 26-025

Brand: Inepro

The Mobile Smart Meter INEPRO PRO-Flex Schuko

(0)

PRO-Flex  is a practical and simple solution that allows you to measure the energy consumption of mobile energyusers / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a completeand costly infrastructure per location.

Price SEK 1,499.00
More
In Stock (49 pcs.)

Reference: 01-066

Brand: Carlo Gavazzi

Carlo Gavazzi EM340-S1 3-fas Modbus meter MID

(1)

Electricity meter 3-phase Carlo Gavazzi EM340-S1 Electricity meter EM340DINAV23XS1PFB for 3-phase (65A / 400V) with Modbus (RS485). Approved for billing measurement, used for net measurement / production. Small size, easy configuration.

Price SEK 1,379.00
More
In Stock (57 pcs.)

Reference: 01-069

Brand: Carlo Gavazzi

Carlo Gavazzi EM111-O1 single-phase puls meter

(0)

Carlo Gavazzi EM111-O1 single-phase puls meter Single-phase energy analyzer with backlit LCD display with integrated touch keypad. Particularly indicated for active energy metering and for cost allocation in MID applications up to 45 A (direct connection)

Price SEK 595.00
More
In Stock (95 pcs.)

Reference: 01-023

Electricity meter single phase Eastron SDM230DR MID

(0)

Single-phase MID-certified electricity meter Eastron SDM230DR MID. Easy to use electricity meter with the extra twist! Fixed counter + resettable counter (tripmeter) + power display. The electricity meter has illuminated display, pulse output and is MID certified. The power measurement shows exactly how many watts currently consumed!

Price SEK 379.00
More
In Stock (144 pcs.)
Comments (0)