- Out-of-Stock

Reference: 02-008
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 01-009
Brand: Eastron
Eastron SDM120D MID single phase meter New MID-certified 1-phase electricity meter for din-rail We focus on offering high quality electricity meters at Sweden's lowest price, fast deliveries from our own warehouse. Here is an electricity meter with both flashing diode and pulse output with 1000 imp/kWh, one module wide. For those who want to be able to...
Reference: 04-013
Brand: Energibutiken, WebIQ AB
Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.
Reference: 01-001
Brand: Eastron
MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...
Reference: 01-004
Brand: Eastron
Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.
Reference: 04-012
Brand: Energibutiken, WebIQ AB
Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.
Reference: 25-001
Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.
Reference: 02-033
Brand: Energibutiken, WebIQ AB
Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.
Reference: 02-006
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 15-001
Brand: Energibutiken, WebIQ AB
Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...
Reference: 25-032
Standard contactor / Relay three phase 63 A Contactors can be used to control loads such as lighting, heating, ventilation, water heaters, electric boilers, heat pumps - simply all places where the load exceeds e.g. what a switch or a smaller relay can handle. Can be used as a power relay for control using Logger 1010 or Logger 3030, for three-phase loads...
Reference: 04-022
Brand: Daikin
Daikin BRP069B42 WIFI module The perfect accessory for your Daikin air source heat pump with this unit enables control and reading of the air source heat pump via an easy-to-use app. Note! this unit fits Daikin Solo and sensira models such as FTXTP25 and FTXTP35
Reference: 02-038
Brand: Energibutiken, WebIQ AB
Sensor 2 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 2 meter cable, 3.5 mm diameter Chip: Dallas DS18B20
Reference: 03-013
Power supply 12V, 1.25A, 15W H Switched power supply 12V 1.25A 15W for DIN rail. The unit has adjustable output voltage 11V to 13V and handels voltage 100V to 240V. The unit has a working temperature of -30°C to + 70°C. This type of power supply has a low idle consumption.
Reference: 25-045
Earth fault circuit breaker type B, 40A, 30mA 1-phase (2pol) 4 moduls CE-marked Earth fault circuit breaker for charging station for electric cars, electric hybrids, charging hybrids. Ground fault circuit interrupter of TYPE B has been a legal requirement since 2017 for charging electric cars. We offer the right switch at an unbeatable price. The earth...
Reference: 25-041
Brand: Chint
Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.
Reference: 02-065
PD3060- PT1000 6-chanel temperature sensor reader The PD3060-PT1000 is a PT100 temperature sensor module (thermoresistive device or RTD) that supports up to 6 sensor inputs. It can connect 2-wire and 3-wire PT1000 sensors. The temperature reading is obtained using the RS-485 communication interface via the ModBus RTU protocol. Ideal for connection to PLC,...
Reference: 02-024
Brand: Energibutiken, WebIQ AB
PT100 sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.
Reference: 15-002
Brand: Energibutiken, WebIQ AB
Vibration dampers with washers and nuts Extra soft vibration dampers, complet kit of 4 pcs including washers and nuts, for those who already have a heat pump mounted on wall brackets and are disturbed by the vibrations from/of the wall. The kit includes 4 vibration dampers.
Reference: 25-020
Personal Protection Switch / Personal Protection Automatic Personal protection circuit breaker is a combination of earth fault circuit breaker and miniature circuit breaker, ie it protects against both earth faults and overcurrent. Combined 1-pole circuit breaker and 2-pole circuit breaker. Suitable for protecting separate 1-pole groups, socket groups,...
Reference: 02-040
Brand: Energibutiken, WebIQ AB
PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12
Reference: 26-001
Electric box for charging stations Complete power supply for charging stations to electric cars and charging hybrids 10-63A (Select in the drop-down list).Contains Electricity Meter SDM630 Modbus MID, Chint NL210 3-phase earth leakage circuit breaker TYP B and three-phase automatic circuit breaker 10-63A.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent