Uppgradering typ b

Reference: 26-036

Skarvuttag CEE16

Reference: 02-024

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 1 meter

PT100 sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 01-089

Electricity meter 3-phase Eastron SDM630-TCP

Direct Type Three Phase Ethernet Modbus TCP Energy Meter For data center metering, and more. Max.100A Direct Load Work with 3P4W/3P3W/1P2W 4 Module 72mm wide Multi-measurement: kWh,kVarh,W,Var,VA,PF,Hz,dmd,V, Bi-directional measurement Ethernet TCP communication

Reference: 26-034

Skarvuttag Svart PVC

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Reference: 15-018

Brand: Energibutiken, WebIQ AB

Vibration dampers WebIQ Powder coated ‘Hard’

WebIQ+ Powder-Coated Hard Vibration Dampers We offer an exclusive kit of vibration dampers for air source heat pumps, specially designed for Energibutiken.se. The kit includes 2 powder-coated WebIQ dampers with hardness 4 and 2 powder-coated WebIQ dampers with hardness 6, making it ideal for most heavier air/air or air/water heat pump models. The dampers...

Reference: 06-002

PT1000 TRANSDUCER 4-20 mA

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Reference: 01-088

Electricity meter 3-phase Carlo Gavazzi EM540 Modbus MID

3-phase electricity meter Carlo Gavazzi EM540 Modbus MID Energy meter for direct metering up to 65A, connection to Modbus. Consumption and production measurement based on each phase. MID Billing approved.

Reference: 02-040

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter BK

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 03-034

Wi-FI smart timer And mätare DIN

Reference: 05-005

Tryckgivare 0-100 bar

LONN-2SX 0-100 bar

Reference: 03-035

Analog timer

Analog timer med DIN Denna analoga tidstyrda strömbrytare kan monteras in i dem flesta normkapslingsmodeller T ex normkapsling 4-moduler som finns i vår webshop. Tidsinställningen gör dagligen med totalt 24 timmars omfång, inom tiden så kan man styra av och påslag med 15 minuters mellanrum. Den analoga brytaren kan användas i stor utsträckning till bland...

Reference: 02-065

PD3060- PT1000 6-chanel temperature sensor reader Modbus

PD3060- PT1000 6-chanel temperature sensor reader The PD3060-PT1000 is a PT100 temperature sensor module (thermoresistive device or RTD) that supports up to 6 sensor inputs. It can connect 2-wire and 3-wire PT1000 sensors. The temperature reading is obtained using the RS-485 communication interface via the ModBus RTU protocol. Ideal for connection to PLC,...

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Reference: 02-062

PT1000 to Modbus (RS485) Modul