PT1000 to Modbus (RS485) Modul

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 04-023

Heat conductive paste 20 grams

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 01-089

Electricity meter 3-phase Eastron SDM630-TCP

Direct Type Three Phase Ethernet Modbus TCP Energy Meter For data center metering, and more. Max.100A Direct Load Work with 3P4W/3P3W/1P2W 4 Module 72mm wide Multi-measurement: kWh,kVarh,W,Var,VA,PF,Hz,dmd,V, Bi-directional measurement Ethernet TCP communication

Reference: 03-007

Brand: Energibutiken, WebIQ AB

Kapsling

Reference: 18-001

Brand: Energibutiken, WebIQ AB

IR-thermometer

Measuring range -50 ° C - + 380 ° C Fever thermometer? Read more under "More info". My personal favorite after testing almost 10 different IR thermometers! IR Thermometer Adjustable emissivity Adjustable + - 4.5 ° C Battery included.

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Reference: 04-022

Heat conductive paste 3 grams

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 04-024

Brand: Finder

Relay module 12/230 V

12 Volt relay module for Logger 1010 & Logger 3030. Relay module: For connection to the digital outputs of Logger 1010 or Logger 3030. Can also be used in combination with one of our contactors for three-phase loads and/or for single-phase currents above 8A. Primary: 12 V dc, 0.5 W Secondary: 230 V ac, max 8 A.

Reference: 04-005

Brand: Energibutiken, WebIQ AB

Electricity meter sensor

Electricity meter sensor Sensor reads flashing from IR or UV diodes, particularly for use with the Logger 2020. Simply attach these sensor via 2-lead wire to Logger 2020:s E1 or E2 terminals in order to monitor energy and power consumtion.

Reference: 02-007

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 2 meter

Tube surface Sensor Affordable 2 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 03-009

Brand: Energibutiken, WebIQ AB

M-bus konverter

M-bus konverter för att kunna koppla Logger 23030 PRO mot våra Actaris Värmemätare med pulsutgångskort + M-bus. OBS! 12V nätdel ingår ej. Klarar upp till 60 stycken enheter anslutna med 12 V 2 A nätdel. Med få enheter anslutna går det bra att köpa vår 12V 1 A nätdel: LÄNK TILL 12 V 1 A NÄTDEL

Reference: 02-040

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter BK

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 02-051

Brand: Energibutiken, WebIQ AB

Temperature - Humidity - Light-sensor module THLIQ-01

Temp / Humidity / Light Module THLIQ-01 High quality module with built-in temperature, humidity and light sensor, based on temp / humidifier HTU21D. Fits Logger 3030, 3030 PRO Modbus and Loggar 2020

Reference: 02-009

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 10 meter

Tube surface Sensor Affordable 10 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 02-012

Brand: Energibutiken, WebIQ AB

PT1000 outdoor temp sensor

PT1000 Outdoor temp sensor is a 2 (or 3)-wire temperature sensors suitable for a Logger 2020's högtempmodul HTMIQSuitable for outdoor measurements in the temperature range from -50 to +90 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation

Reference: 02-014

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 5 Meter

PT1000 sensor, max 200°C, 5 meter 6 X 50 mm 2-wire universal temperature sensor with 5 meter cable, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot.