PT100 Room sensor

Reference: 02-033

Brand: Energibutiken, WebIQ AB

Hose clamp

Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.

Reference: 02-036

Brand: Energibutiken, WebIQ AB

Compression fitting for temp sensors

Compression fitting for temp sensors Smooth compression fittings for mounting temperature probes with 6 mm sleeve (see picture). This compression fitting allows you, via a T-pipe coupling, to plug in your temp sensor directly in the flow of the liquid you are measuring the temperature of.

Reference: 04-010

Brand: Energibutiken, WebIQ AB

Heat conductive paste 3 ml

Heat conductive paste 3 ml This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 02-057

Väggdisplay PT100/PT500/PT1000

Reference: 04-022

Heat conductive paste 3 grams

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 02-028

Brand: Energibutiken, WebIQ AB

PT100 high temp sensor 6 mm 400°C 3-wire, 3 meter

PT100 High temp sensor -50 to +400°C 2-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-030

Brand: Energibutiken, WebIQ AB

PT100 tube surface sensor, 3 meter cable

PT100 tube surface sensor, 3 meter Sensor, affordable PT100B temperature sensor, 3 meter cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68.  Note this model cannot be connected to the Logger 3030.  

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Reference: 02-101

PT100 Universalgivare 50 x 3 mm. 5 m

Reference: 02-066

PD3060E- PT100 6-chanel Modbus RTU with Display

PD3060E- PT100 6-chanel Modbus RTU with Display The PD3060E - PT100 is a PT100 temperature sensor module (thermoresistive device or RTD) that supports up to 6 sensor inputs. It can connect 2-wire and 3-wire PT100 sensors. The temperature reading is obtained using the RS-485 communication interface via the ModBus RTU protocol. Ideal for connection to PLC,...

Reference: 02-023

Brand: Energibutiken, WebIQ AB

PT100 outdoor temp sensor

PT100 Outdoor temp sensor Two-wire temperature sensors suitable for a Logger 2020's high temp module HTMIQ Suitable for outdoor measurements in the temperature range -50°C ... +90°C. Can replace sensors used in PT100-based building automation systems

Reference: 02-025

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm 3 meter

PT100 sensor, max 200°C, 3 meter 6 X 50 mm 3-wire universal temperature sensor.Suitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-026

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm 10 meter

PT100 sensor, max 200°C, 10 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 04-023

Heat conductive paste 20 grams

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 02-031

Brand: Energibutiken, WebIQ AB

PT100 tube surface sensor, 10 meter cable

PT100 tube surface sensor, 10 meter Sensor, affordable PT100B temperature sensor, 10 meter 3-wire cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68. Note this model cannot be connected to the Logger 3030.  

Reference: 02-044

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 5 meter BK

PT100 sensor, max 200°C, 5 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.