PT1000 M8X50 mm temp sensor, 3-wire, 3 meter

Reference: 02-050

Brand: Energibutiken, WebIQ AB

PT1000 tube surface sensor, 5 meter, 2-wire

PT1000 tube surface sensor 5 meter 2-wire Sensor, affordable PT1000B temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68.  Can replace Danfoss ESMC

Reference: 06-002

PT1000 TRANSDUCER 4-20 mA

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Reference: 02-013

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 02-033

Brand: Energibutiken, WebIQ AB

Hose clamp

Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.

Reference: 02-063

Modbus/PT1000 modul + 4 Digitala in.

Reference: 02-065

PD3060- PT1000 6-chanel temperature sensor reader Modbus

PD3060- PT1000 6-chanel temperature sensor reader The PD3060-PT1000 is a PT100 temperature sensor module (thermoresistive device or RTD) that supports up to 6 sensor inputs. It can connect 2-wire and 3-wire PT1000 sensors. The temperature reading is obtained using the RS-485 communication interface via the ModBus RTU protocol. Ideal for connection to PLC,...

Reference: 04-023

Heat conductive paste 20 grams

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 02-057

Väggdisplay PT100/PT500/PT1000

Reference: 02-042

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 10 Meter, 3-wire BK

PT1000 sensor, max 200°C, 3-wire, 10 meter 10 meter 3-wire 6 X 50 mm universal temperature sensor, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200° C temp.

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 07-010

Temp pocket for ventilation

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Reference: 02-040

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter BK

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Reference: 02-047

Brand: Danfoss

Danfoss ESM-10 replacement sensor indoor

PT1000 Indoor temp sensor Suitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESM 10 and others PT1000-sensors used in building automation.

Reference: 02-048

Brand: Danfoss

Danfoss ESMT replacement sensor outdoor

Danfoss ESMT replacement sensor Suitable for outdoor measurements in the temperature range from -50 to +90°C.Can replace Danfoss ESM-11 and others PT1000 outdoor temp sensors used in building automation