PT1000 Universal temp sensor 6 mm, 1 meter BK

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Reference: 02-061

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

PT1000 High temp sensor -50 to +200°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 02-014

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 5 Meter

PT1000 sensor, max 200°C, 5 meter 6 X 50 mm 2-wire universal temperature sensor with 5 meter cable, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot.

Reference: 02-048

Brand: Danfoss

Danfoss ESMT replacement sensor outdoor

Danfoss ESMT replacement sensor Suitable for outdoor measurements in the temperature range from -50 to +90°C.Can replace Danfoss ESM-11 and others PT1000 outdoor temp sensors used in building automation

Reference: 02-019

Brand: Energibutiken, WebIQ AB

PT1000 tube surface sensor, 10 meter, 3-wire

PT1000 tube surface sensor 10 meter 3-wire Sensor, affordable PT1000B temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68.  Can replace Danfoss ESMC

Reference: 02-065

PD3060- PT1000 6-chanel temperature sensor reader Modbus

PD3060- PT1000 6-chanel temperature sensor reader The PD3060-PT1000 is a PT100 temperature sensor module (thermoresistive device or RTD) that supports up to 6 sensor inputs. It can connect 2-wire and 3-wire PT1000 sensors. The temperature reading is obtained using the RS-485 communication interface via the ModBus RTU protocol. Ideal for connection to PLC,...

Reference: 02-062

PT1000 to Modbus (RS485) Modul

Reference: 02-036

Brand: Energibutiken, WebIQ AB

Compression fitting for temp sensors

Compression fitting for temp sensors Smooth compression fittings for mounting temperature probes with 6 mm sleeve (see picture). This compression fitting allows you, via a T-pipe coupling, to plug in your temp sensor directly in the flow of the liquid you are measuring the temperature of.

Reference: 02-017

Brand: Energibutiken, WebIQ AB

PT1000 tube surface sensor, 3-wire

PT1000 3-wire tube surface sensor Sensor, affordable 3-wire PT1000B temperature sensor, 1 meter cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68. Can replace Danfoss ESMC.

Reference: 02-057

Väggdisplay PT100/PT500/PT1000

Reference: 04-022

Heat conductive paste 3 grams

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 06-002

PT1000 TRANSDUCER 4-20 mA

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Reference: 02-012

Brand: Energibutiken, WebIQ AB

PT1000 outdoor temp sensor

PT1000 Outdoor temp sensor is a 2 (or 3)-wire temperature sensors suitable for a Logger 2020's högtempmodul HTMIQSuitable for outdoor measurements in the temperature range from -50 to +90 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation

Reference: 02-047

Brand: Danfoss

Danfoss ESM-10 replacement sensor indoor

PT1000 Indoor temp sensor Suitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESM 10 and others PT1000-sensors used in building automation.