Hose clamp

Reference: 02-049

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 10 meter BK

PT100 sensor, max 200°C, 10 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-065

PD3060- PT1000 6-chanel temperature sensor reader Modbus

PD3060- PT1000 6-chanel temperature sensor reader The PD3060-PT1000 is a PT100 temperature sensor module (thermoresistive device or RTD) that supports up to 6 sensor inputs. It can connect 2-wire and 3-wire PT1000 sensors. The temperature reading is obtained using the RS-485 communication interface via the ModBus RTU protocol. Ideal for connection to PLC,...

Reference: 02-021

Brand: Energibutiken, WebIQ AB

PT1000 M8X50 mm temp sensor, 3-wire, 3 meter

PT1000 M8 high temp sensor, 3-wire, 3 meter Innovative new 3-wire M8 PT1000 high temp sensor. Suitable for measurement of all media that does not get more than 400 ° C hot, here in the form of an M8 bolt that makes it easy to measure fumes and other things wherer you can drill/thread a threaded hole fitting the M8 bolt temp sensor. M8 Nut included

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 02-042

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 10 Meter, 3-wire BK

PT1000 sensor, max 200°C, 3-wire, 10 meter 10 meter 3-wire 6 X 50 mm universal temperature sensor, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200° C temp.

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 02-017

Brand: Energibutiken, WebIQ AB

PT1000 tube surface sensor, 3-wire

PT1000 3-wire tube surface sensor Sensor, affordable 3-wire PT1000B temperature sensor, 1 meter cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68. Can replace Danfoss ESMC.

Reference: 07-010

Temp pocket for ventilation

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Reference: 02-024

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 1 meter

PT100 sensor, max 200°C, 1 meter6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-003

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 5 meter

Sensor 5 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 5 meter cable Chip: Dallas DS18B20

Reference: 02-004

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 10 meter

Sensor 10 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 10 meter black silicon cable Chip: Dallas DS18B20

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Reference: 02-038

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 2 meter

Sensor 2 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 2 meter cable, 3.5 mm diameter Chip: Dallas DS18B20

Reference: 02-040

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter BK

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 02-019

Brand: Energibutiken, WebIQ AB

PT1000 tube surface sensor, 10 meter, 3-wire

PT1000 tube surface sensor 10 meter 3-wire Sensor, affordable PT1000B temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68.  Can replace Danfoss ESMC

Reference: 02-002

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO outdoor sensor

1-wire PRO Outdoor sensor Three-wire Dallas DS18B20 outdoor sensor suitable for Logger 3030 and Logger 2020's 1-wire inputs. (Can be used on both the parasite power and 3-wire terminals depending on how you connect it.)Solid enclosed outdoor sensor from which to measure the temperature outdoors, range -55 to +125 ° C.