PT1000 Universal temp sensor 6 mm 3 meter

Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 02-065

PD3060- PT1000 6-chanel temperature sensor reader Modbus

PD3060- PT1000 6-chanel temperature sensor reader The PD3060-PT1000 is a PT100 temperature sensor module (thermoresistive device or RTD) that supports up to 6 sensor inputs. It can connect 2-wire and 3-wire PT1000 sensors. The temperature reading is obtained using the RS-485 communication interface via the ModBus RTU protocol. Ideal for connection to PLC,...

Reference: 02-042

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 10 Meter, 3-wire BK

PT1000 sensor, max 200°C, 3-wire, 10 meter 10 meter 3-wire 6 X 50 mm universal temperature sensor, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200° C temp.

Reference: 02-013

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Reference: 07-010

Temp pocket for ventilation

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Reference: 02-033

Brand: Energibutiken, WebIQ AB

Hose clamp

Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.

Reference: 02-003

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 5 meter

Sensor 5 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 5 meter cable Chip: Dallas DS18B20

Reference: 04-010

Brand: Energibutiken, WebIQ AB

Heat conductive paste 3 ml

Heat conductive paste 3 ml This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 02-046

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 15 meter

Tube surface Sensor Affordable 15 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 02-028

Brand: Energibutiken, WebIQ AB

PT100 high temp sensor 6 mm 400°C 3-wire, 3 meter

PT100 High temp sensor -50 to +400°C 2-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Reference: 02-044

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 5 meter BK

PT100 sensor, max 200°C, 5 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-030

Brand: Energibutiken, WebIQ AB

PT100 tube surface sensor, 3 meter cable

PT100 tube surface sensor, 3 meter Sensor, affordable PT100B temperature sensor, 3 meter cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68.  Note this model cannot be connected to the Logger 3030.  

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 02-007

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 2 meter

Tube surface Sensor Affordable 2 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20